01
T1+T2 Combo AC Surge Protective Device for Total Surge Immunity
Product introduction
Monobloc design, large-capacity housing designed for high surge energy
Meets both Class I (10/350μs waveform) and Class II (8/20μs waveform)SPD standards
Zinc oxide-based high-performance MOV technology
Remote signaling function optional
Compact design minimizes DIN rail space
Standard red/green status indicator
Meets both Class I (10/350μs waveform) and Class II (8/20μs waveform)SPD standards
Zinc oxide-based high-performance MOV technology
Remote signaling function optional
Compact design minimizes DIN rail space
Standard red/green status indicator
Technical parameters
| Model RS-05 | |
| None | 1P / 2P / 3P / 4P |
| Test Class Category | T1 (Class I)+T2 (Class II) |
| Max. continuous operating voltage (a.c.) [Uc] | 275V / 385V / 420V |
| Impulse discharge current (10/350 μs) [Iimp] | 25 kA |
| Nominal discharge current (8/20µs) [In] | 80kA |
| Max. discharge current (8/20µs) [Imax] | 150kA |
| Protection level [Up] | 1.5kV / 1.8kV / 2.0kV / 2.5kV |
| Response time [tA] |
|
| Protection rating | IP20 |
| Operating state / fault indication | Green / Red |
| Operating temperature | -40℃~+80℃ |
| Plugable way | / |
| Mounting | 35mm DIN rail |
| Standards Compliance | IEC 61643-11 / GB 18802.1 |
Overall Dimensions
Wiring diagram
