SPD Backup Protector Surge protector with Special Circuit Breaker

Through the current parameter changes to achieveselective control trip mechanism segmentation;
Impulse current residual voltage is low. the testperformance is better than the air to open and fuse;
The use of high-energy materials to solve productlife issues;
Products can be:T1,T2,T3 supporting the use ofthree types of SDP;
Installed in the 35mm card rail use;
Optional remote control alarm.

product details

Product introduction

RSY3(NSCB) surge protection device is a specially developed for the SPD provide the perfect back-upprotection solution products, The product solves the problem that the user circuit breaker or the fuse hasthe potential safety hazard when acting as SPD back-up protection, RSY3(NSCB) is suitable for the powersupply system of TT,TN and so on under 50/60Hz.400V,with lightning current passing without false trip; Short circuit when the current cut off qukckly; residualimpulse current low voltage characteristics. Product isin compliance with GB18802.1-2011 and IEC61643-11-2011 standards.

Technical Parameter

Model and Specifictaion	RSY3-15	RSY3-80	RSY3-60	RSY3-40	RSY3-20
Experiment Category	T1	T2	T2	T3	T3
Rated Operating Voltage Uc (VAC)	AC 230V /400V
Imp Maximum inrush current	15KA	-	-	-	-
Nominal Discharge Current (8/20μs)ln (kA)	15KA	40KA	30KA	20KA	10KA
Maximum Discharging Current (8/20μs)ln (kA)	-	80KA	60KA	40KA	20KA
Applicable SPD
Frequency short-circuit current breaking capacity	50KA	50KA	25 KA	25 KA	15KA
Frequency short-circuit current	3A
Power Frequency Breacking Time	0.3S
Power Frequency Current Breaking Times	1000 Times
Ambient Air Temperature	‘-40℃~+80℃
Poles	1P , 2P, 3P,4P
Installation	Standard Rail 35mm