01
Factory Prices 80kA 100kA Surge Protective Device SPD
Product introduction
The RS-02 Series surge protective device (SPD) is has the a larger capacity surge to meet the maximum discharge current requirements.
The SPD features single-sided terminals to prevent electric contact and is designed for fixed indoor installation with voltage-limiting functionality. It includes a built-in disconnector that automatically isolates the SPD from the network in case of overheating or failure, providing a signal and a visible status window. The window displays green during normal operation and swit
Plug-in module design for easy replacement & maintenance.
Large-capacity housing designed for high surge energy
Meets Class II SPD standards (8/20μs waveform)
Zinc oxide-based high-performance MOV technology
Compact design minimizes DIN rail space
Standard red/green status indicator
Technical Parameter
| Model | RS-02 | |
| None | 1P /2P /3P /4P | |
| Test Class Category | T2 (Class II) | |
| Max. continuous operating voltage (a.c.) [Uc] | 275V /385V /420V | |
| Nominal discharge current (8/20µs) [In] | 40kA | 50kA |
| Max. discharge current (8/20µs) [Imax] | 80kA | 100kA |
| Protection level [Up] | 1.5kV /1.8kV /2.0kV | |
| Response time [tA] | ||
| Protection rating | IP20 | |
| Operating state / fault indication | Green/Red | |
| Operating temperature | ‘-40℃~+80℃ | |
| Plugable way | Plug-in Module | |
| Mounting | 35mm DIN rail | |
| Standards Compliance | IEC 61643-11 / GB 18802.1 | |
Overall Dimensions
Wiring diagram
