01
2P 3P 1000VDC Lightning Surge Protector SPD
Product introduction
The DC surge protection circuit effectively limits and absorbs sudden surge voltage and current, safe guarding equipment and circuits from damage. It provides transient overvoltage and overcurrent protection, ensuring equipment safety during surge events. The product supports a maximum continuous operating voltage of 1000V to 1500V.
Hot-swappable, pluggable module design for easy replacement and maintenance
High-energy DC surge handling for PV systems
Meets Class II SPD standards (8/20μs waveform)
Zinc oxide-based high-performance MOV technology
Compact design minimizes DIN rail space
Standard red/green status indicator
Overall Dimensions
| Model | RS-06-DC | |
| None | 1P /2P /3P | |
| Test Class Category | T2 (Class II) | |
| Max. continuous operating voltage (d.c.) [Uc] | 600V / 800V/ 1000V/ 1500V | |
| Nominal discharge current (8/20µs) [In] | 20kA | 30kA |
| Max. discharge current (8/20µs) [Imax] | 40kA | 60kA |
| Protection level [Up] | 3.2kV/ 3.6kV/ 4.0kV/4.5kV | |
| Response time [tA] | ||
| Protection rating | IP20 | |
| Operating state / fault indication | Green/Red | |
| Operating temperature | ‘-40℃~+80℃ | |
| Plugable way | Hot - Swappable | |
| Mounting | 35mm DIN rail | |
| Standards Compliance | IEC 61643-11 / GB 18802.1 | |
Wiring diagram
